| Screw Thread d | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M20 | ||||
| P | Fita | M zaren | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | ||
| Zare mai kyau-1 | / | / | 1 | 1.25 | 1.5 | 1.5 | 1.5 | 1.5 | ||||
| Zare mai kyau-2 | / | / | / | 1 | 1.25 | / | / | / | ||||
| b | L≤125 | 16 | 18 | 22 | 26 | 30 | 34 | 38 | 46 | |||
| 125 ml≤200 | / | / | 28 | 32 | 36 | 40 | 44 | 52 | ||||
| L ＞200 | / | / | / | / | / | / | 57 | 65 | ||||
| c | min | 1 | 1.1 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 3 | |||
| da | Form A | max | 5.7 | 6.8 | 9.2 | 11.2 | 13.7 | 15.7 | 17.7 | 22.4 | ||
| Form B | max | 6.2 | 7.4 | 10 | 12.6 | 15.2 | 17.7 | 20.7 | 25.7 | |||
| dc | max | 11.8 | 14.2 | 18 | 22.3 | 26.6 | 30.5 | 35 | 43 | |||
| ds | max | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 20 | |||
| min | 4.82 | 5.82 | 7.78 | 9.78 | 11.73 | 13.73 | 15.73 | 19.67 | ||||
| du | max | 5.5 | 6.6 | 9 | 11 | 13.5 | 15.5 | 17.5 | 22 | |||
| dw | min | 9.8 | 12.2 | 15.8 | 19.6 | 23.8 | 27.6 | 31.9 | 39.9 | |||
| e | min | 8.71 | 10.95 | 14.26 | 16.5 | 17.62 | 19.86 | 23.15 | 29.87 | |||
| f | max | 1.4 | 2 | 2 | 2 | 3 | 3 | 3 | 4 | |||
| k | max | 5.4 | 6.6 | 8.1 | 9.2 | 11.5 | 12.8 | 14.4 | 17.1 | |||
| k1 | min | 2 | 2.5 | 3.2 | 3.6 | 4.6 | 5.1 | 5.8 | 6.8 | |||
| r1 | min | 0.25 | 0.4 | 0.4 | 0.4 | 0.6 | 0.6 | 0.6 | 0.8 | |||
| r2 | max | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.9 | 1 | 1.2 | |||
| r3 | min | 0.1 | 0.1 | 0.15 | 0.2 | 0.25 | 0.3 | 0.35 | 0.4 | |||
| r4 | ≈ | 3 | 3.4 | 4.3 | 4.3 | 6.4 | 6.4 | 6.4 | 8.5 | |||
| s | max= girman girman | 8 | 10 | 13 | 15 | 16 | 18 | 21 | 27 | |||
| min | 7.78 | 9.78 | 12.73 | 14.73 | 15.73 | 17.73 | 20.67 | 26.67 | ||||
| t | max | 0.15 | 0.2 | 0.25 | 0.3 | 0.35 | 0.45 | 0.5 | 0.65 | |||
| min | 0.05 | 0.05 | 0.1 | 0.15 | 0.15 | 0.2 | 0.25 | 0.3 | ||||
yankin aikace-aikace
Bukatun nau'in buƙatun hexagon flange bolts sun bambanta bisa ga wurare daban-daban na amfani.Gabaɗaya magana, hexagon flange bolts ana amfani da ko'ina a masana'antu da gine-gine, cranes, excavators da sauran nauyi injuna.
An ce kowane namiji ya yi mafarki ya bude injin tono.Bari mu buše aikace-aikace da asiri na excavator.
injin tono
Ƙaƙƙarfan sandunan flange na sanda suna dacewa da haɗin kai ƙarƙashin ƙarfi mai canzawa.Yanayin damuwa na haɗin kusoshi na excavator ana iya raba shi zuwa ramuka na yau da kullun da reamed.Za a yi daidai da maƙallan tulu don ramukan ramuka da girman ramin lokacin da aka juyar da su.Domin biyan buƙatun kullewa bayan shigar da na'urar tono, akwai ramuka a cikin sandar, wanda zai iya hana ƙugiya daga sassautawa lokacin da aka yi rawar jiki.Lokacin shigar da madaidaicin kusoshi a kan excavator, shugaban ƙwanƙwasa zai kasance a gefen sama na haɗin gwiwa, kuma goro da kawunan za a dawo da su a lokaci guda daga cibiyar haɗin gwiwa zuwa gefen (a cikin kwatance huɗu) don kammala ɗaure. na kusoshi.
Kariyar lalatawa da rufe haɗin haɗin gwiwa Don hana nakasar filastik a ƙarƙashin tashin hankali na waje, ana iya fentin Layer na fari (kamar resin epoxy, foda na zinc, da sauransu) akan fuskar haɗin haɗin da aka kulle, ko kuma kullin yana da nasa. rufin kansa.
Tare da canjin buƙatun kasuwa, an sami sabbin nau'ikan nau'ikan kusoshi na flange hexagon iri-iri.Cross recessed tashe hexagon head aronji, hexagon flange itace aronji, hexagon flange triangular kai kulle kulle, hexagon flange kai tapping kai hakowa aronji, hexagon flange kai tapping kai hakowa aronji (shafi + EPDM composite gasket), da dai sauransu.
