| Screw Thread d | M5 | M6 | M8 | M10 | M12 | M14 | M16 | M20 | ||||
| P | Fita | M zaren | 0.8 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | ||
| Zare mai kyau-1 | / | / | 1 | 1.25 | 1.5 | 1.5 | 1.5 | 1.5 | ||||
| Zare mai kyau-2 | / | / | / | 1 | 1.25 | / | / | / | ||||
| b | L≤125 | 16 | 18 | 22 | 26 | 30 | 34 | 38 | 46 | |||
| 125 ml≤200 | / | / | 28 | 32 | 36 | 40 | 44 | 52 | ||||
| L ＞200 | / | / | / | / | / | / | 57 | 65 | ||||
| c | min | 1 | 1.1 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 3 | |||
| da | Form A | max | 5.7 | 6.8 | 9.2 | 11.2 | 13.7 | 15.7 | 17.7 | 22.4 | ||
| Form B | max | 6.2 | 7.4 | 10 | 12.6 | 15.2 | 17.7 | 20.7 | 25.7 | |||
| dc | max | 11.8 | 14.2 | 18 | 22.3 | 26.6 | 30.5 | 35 | 43 | |||
| ds | max | 5 | 6 | 8 | 10 | 12 | 14 | 16 | 20 | |||
| min | 4.82 | 5.82 | 7.78 | 9.78 | 11.73 | 13.73 | 15.73 | 19.67 | ||||
| du | max | 5.5 | 6.6 | 9 | 11 | 13.5 | 15.5 | 17.5 | 22 | |||
| dw | min | 9.8 | 12.2 | 15.8 | 19.6 | 23.8 | 27.6 | 31.9 | 39.9 | |||
| e | min | 8.71 | 10.95 | 14.26 | 16.5 | 17.62 | 19.86 | 23.15 | 29.87 | |||
| f | max | 1.4 | 2 | 2 | 2 | 3 | 3 | 3 | 4 | |||
| k | max | 5.4 | 6.6 | 8.1 | 9.2 | 11.5 | 12.8 | 14.4 | 17.1 | |||
| k1 | min | 2 | 2.5 | 3.2 | 3.6 | 4.6 | 5.1 | 5.8 | 6.8 | |||
| r1 | min | 0.25 | 0.4 | 0.4 | 0.4 | 0.6 | 0.6 | 0.6 | 0.8 | |||
| r2 | max | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.9 | 1 | 1.2 | |||
| r3 | min | 0.1 | 0.1 | 0.15 | 0.2 | 0.25 | 0.3 | 0.35 | 0.4 | |||
| r4 | ≈ | 3 | 3.4 | 4.3 | 4.3 | 6.4 | 6.4 | 6.4 | 8.5 | |||
| s | max= girman girman | 8 | 10 | 13 | 15 | 16 | 18 | 21 | 27 | |||
| min | 7.78 | 9.78 | 12.73 | 14.73 | 15.73 | 17.73 | 20.67 | 26.67 | ||||
| t | max | 0.15 | 0.2 | 0.25 | 0.3 | 0.35 | 0.45 | 0.5 | 0.65 | |||
| min | 0.05 | 0.05 | 0.1 | 0.15 | 0.15 | 0.2 | 0.25 | 0.3 | ||||
Grade 8.8 giciye recessed launi zinc plated flange kusoshi tare da hakora wani hadadden angwaye kunshi wani hexagon kai tare da giciye recessed kai da flange farantin (gacet da ke ƙasa da hexagon da hexagon ana gyarawa gaba ɗaya) da dunƙule sanda (a). silinda mai zaren waje).Yana buƙatar a daidaita shi da goro don ɗaure sassan da ke haɗa biyu ta ramuka.
1. Nau'in kai hexagon:
Daya lebur kai ne, dayan kuma kai ne mai dunkulewa, kuma akwai ramukan giciye.
2. Kashin launi na saman:
Dangane da buƙatu daban-daban, an lulluɓe saman tare da farin, kore na soja, rawaya da Dacromet mai jure lalata.
3. Nau'in Flange:
Dangane da wurare daban-daban na amfani da kusoshi na flange, girman buƙatun faranti sun bambanta.Har ila yau, akwai lebur gindi da faranti masu haƙori, waɗanda ke taka rawa na rigakafin skid.
4. Dangane da yanayin haɗin kai:
Akwai talakawa da reamed flange kusoshi.Makullin flange da aka yi amfani da shi don reaming za su dace da girman ramin kuma a yi amfani da su lokacin da aka juyar da su.
Hexagon flange kusoshi
Bugu da ƙari, don saduwa da buƙatun kullewa bayan shigarwa, idan akwai ramuka a cikin sanda, waɗannan ramukan na iya hana kullun daga kwancewa lokacin da aka yi musu girgiza.Wasu kusoshi na flange ba su da zare, kuma sandan da aka goge ya kamata ya zama sirara, wanda ake kira siraren sanda mai bakin ciki.Wannan nau'in ƙulli na flange yana dacewa da haɗin kai a ƙarƙashin ƙungiyoyi masu canzawa.Akwai ƙwanƙwasa masu ƙarfi na musamman akan tsarin ƙarfe, shugaban zai fi girma, kuma girman kuma zai canza.
Amfani da masana'antu:
Akan injuna daban-daban, kayan aiki, motoci, jiragen ruwa, layin dogo, gadoji, gine-gine, tsarin, kayan aiki, kayan aiki da kayayyaki
